LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Collision - Body Panel Repair (F25)) >> Luggage Compartment Floor >> 41 12 655 Replacing Left Luggage Compartment Floor (Tail Panel Has Been Removed)

41 12 655 Replacing Left Luggage Compartment Floor (Tail Panel Has Been Removed)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Observe procedure for REPAIR STAGE 3 .

Read contents of BODY, GENERAL .

Following new body parts are required (see OVERVIEW OF CONSUMABLES ):

Removal 

Open welded connections in area (1).

Fig 2: Identifying Rear Luggage Compartment Floor Welded Connections Area
G09947693Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Fig 3: Identifying Rear Luggage Compartment Floor Welded Connections Area
G09947694Courtesy of BMW OF NORTH AMERICA, INC.

Shown without side panel for purposes of clarity.

Open welded connections in areas (1).

Remove the luggage compartment floor.

Fig 4: Identifying Luggage Compartment Floor Welded Connections Area
G09947695Courtesy of BMW OF NORTH AMERICA, INC.

Installation 

Install new part and weld.

IMPORTANT: Only weld new part in areas (1) after installing tail panel!
Fig 5: Identifying Tail Panel Weld Part Areas
G09947696Courtesy of BMW OF NORTH AMERICA, INC.