41 61 000 Removing And Installing Engine Compartment Lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT MICROFILTER HOUSING COVER .

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Fig 1: Turning Clamp And Washer Fluid Line

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Support the engine compartment lid. Removal of the engine compartment lid must be carried out with the assistance of a second person.

Unscrew nuts (1).

Remove engine compartment lid.

Installation note:

Install engine compartment lid at screw locations to on hinge.

Tightening torque 41 61 1AZ .

If necessary, adjust ENGINE COMPARTMENT LID .

Fig 2: Identifying Engine Compartment Lid Nuts

Courtesy of BMW OF NORTH AMERICA, INC.