41 00... Opening Bonded Connections
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
- Opening spot-welded adhesive joint
WARNING: Extract vapors and gases.
Use personal protective clothing/equipment.Heat connecting flange with a hot air blower. Heat components to max. 250 °C object temperature.
Release connecting flange with chisel.
Remove adhesive residue from connecting flange.
- Opening bonded connections
If necessary, open existing PUNCH OR BLIND RIVETS .
Roughly cut out damaged component.
WARNING: Extract vapors and gases.
Use personal protective clothing/equipment.Heat adhesive flange with a hot air blower. Heat components to max. 250 °C object temperature.
The component can be peeled with the aid of pliers. Do not damage adjacent components.
Remove adhesive residue from connecting flange.
- Opening bonded connections on aluminum roofs
Procedure is described in detailed in the relevant repair instructions.
- Opening bonded connections on carbon-fibre-reinforced plastic parts
Procedure is described in detailed in the relevant repair instructions.