63 13 250 Removing and installing/replacing front left or right side repeater mirror

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

REMOVE HOUSING ON EXTERIOR MIRROR .

Removal:

If applicable, unlock and disconnect the connector (1).

Release the screw (2) and remove the side repeater (3) from the housing of the exterior mirror (4).

Fig 1: Identifying Exterior Mirror Screw, Side Repeater And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Attach the side repeater (3) to the housing of the exterior mirror (4).

Tighten down screw (2).

If applicable, connect the connector (1).

Installation note:

Make sure the side repeater (3) is correctly fitted on the exterior mirror housing (4).

Fig 2: Identifying Exterior Mirror Screw, Side Repeater And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

REMOVE HOUSING ON EXTERIOR MIRROR .