63 11 731 Replacing LED module for left daytime driving lights

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Necessary preliminary tasks:

Remove BUMPER PANEL

NOTE: Headlight shown removed for purposes of clarity.

Release screws (1).

Lift out LED module (2).

Fig 1: Identifying LED Module And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove LED module (2).

Installation note:

Always replace LED modules (2) as a pair.

Replace seal (3) for LED module (2).

Make sure LED module (2) is correctly seated.

Note BULB TYPE .

Fig 2: Identifying LED Module, Plug Connection And Seal

Courtesy of BMW OF NORTH AMERICA, INC.