52 13 405 Replacing backrest cover for left or right front seat (normal/manual)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

52 0 050

Necessary preliminary tasks:

Remove FRONT SEAT
Remove side airbag in front seat
Remove GUIDE SLEEVES

Version with seat heating only:

Unfasten plug connection (1) and disconnect.

Disconnect cable straps.

Release wiring harness (2) from cable holders on seat mechanism.

IMPORTANT: Feed the wiring harness carefully through the seat and backrest mechanism as the edges of the frame can be sharp.

Fig 1: Locating Plug Connection And Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.

Detach backrest cover (1) from backrest frame.

Fig 2: Detaching Backrest Cover From Backrest Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Pull backrest cover (1) off Velcro-type fastener on backrest frame.

Fig 3: Pulling Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off backrest cover (1) with padding sideways and towards top from backrest frame.

Fig 4: Pulling Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release all retainers in marked area.

Remove backrest cover from padding.

NOTE: Remove all remnants of retainers from backrest cover and padding.

Fig 5: Identifying Seat Retainers Marked Area

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Bend new retainer (2) with special tool 52 0 050 .

Support
Retainer
Trim thread in support
Trim wire in backrest cover
Back-rest cover

Fig 6: Pressing Retainer Using Special Tool (52 0 050)
Courtesy of BMW OF NORTH AMERICA, INC.

Replacement of backrest cover:

Pull trim threads out of backrest cover.

Cut new backrest cover to size and insert trim threads.

Fig 7: Identifying Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.