67 31 531 Removing and installing/replacing backrest adjustment motor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove OUTER COVER
Unlock plug connections (2) and disconnect.
Release screws (1).
Remove backrest adjustment motor from flange.
Installation note:
Make sure drive shaft is correctly seated in gearbox.