67 62 020 Removing and installing/replacing flat motor for rear left or right power window regulator

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Before replacement of flat motor, observe NOTES on installation status!

Necessary preliminary work:

Remove REAR POWER WINDOW REGULATOR

Release screws (1).

Remove flat motor (2) from power window regulator.

IMPORTANT: Ensure that the flat motor (2) is assembled without tension.

Fig 1: Identifying Power Window Regulator, Flat Motor And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

An initialization must be carried out in order to activate anti-trap mechanism.

Read and comply with NOTES on initialization of power window regulator.