51 34 211 Replacing rubber seal for rear left or right door window
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove COVER ON INSIDE OF DOOR WINDOW FRAME
- Remove COVER ON WINDOW FRAME (FRONT)
- Remove COVER ON WINDOW FRAME (REAR)
IMPORTANT:
The "INSTRUCTIONS ON FITTING WINDOW GUIDE SEALS " serve as the basis for this repair instruction and must be observed without fail.
Pull rubber seal (1) at side out of window guides.
Feed rubber seal (1) at top out of window frame.
Installation note:
Moisten rubber window seal (1) for side fitting with APPROVED LUBRICANT .
If necessary, retract door window glass approx. 50 mm into rubber seal (1).
Open door window glass and at same time slide rubber seal (1) downwards.