51 22 300 Removing and installing/replacing weather strip on rear door on left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317
00 9 324

IMPORTANT: Observe PROCEDURE for using special tool 00 9 324 .

IMPORTANT: If reusing the existing weather strip (1), make sure it is not bent.

Lever out weather strip (1) with special tool 00 9 324 (starting at B-pillar).

Simultaneously lift out weather strip (1) with special tool 00 9 317 in the vicinity of the B-pillar.

Fig 1: Lifting Weather Strip

Courtesy of BMW OF NORTH AMERICA, INC.