61 31 172 Removing and installing/replacing switch for electromechanical parking brake
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- DISCONNECT NEGATIVE BATTERY CABLE (to avoid fault memory entries)
- F03 only: Disconnect both battery negative cables
- Remove GEAR SELECTOR SWITCH COVER
Release screws (1).
Remove switch for electromechanical parking brake (2) from cover for gear selector switch (3).