51 45 184 Removing and installing/replacing trim panel for pedal assembly (US only)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with SAFETY REGULATIONS
for handling airbag modules and pyrotechnical belt tensioners.
IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
Clamp off battery lead from negative connection point
US only:
Release screws (1).
Installation note:
Replace screws.
Tightening torque 51 45 4AZ .
Release screw (3).
Fold back console trim (4).
Lower panel (2) slightly and disconnect plug connections behind.
Remove trim panel (2).
Replacement:
- Remove FOOTWELL LIGHT
- Remove SPEAKER FOR HANDS-FREE SYSTEM
- Remove airbag module