51 23 110 Removing and installing/replacing left engine compartment lid lock

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TOP REAR CONNECTION

Engine compartment lid catch with microswitch:

Detach plug connection (1) by twisting from catch carrier.

Unfasten plug connection (1) and disconnect.

Fig 1: Identifying Engine Compartment Lid Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 23 2AZ .

Remove engine compartment lid lock (2) downwards.

Fig 2: Identifying Engine Compartment Lid Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage Bowden cable (1) in direction of arrow from engine compartment lid lock (2).

Remove engine compartment lid catch.

Fig 3: Disengaging Bowden Cable From Engine Compartment Lid Lock

Courtesy of BMW OF NORTH AMERICA, INC.