51 64 025 Removing and installing/replacing upper front connection

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Risk of burning!
Only perform work after engine has cooled down.

IMPORTANT: Driving without connection is not permissible (risk of damage to body).

Necessary preliminary tasks:

Remove HEADLIGHT MOUNTING on left

Undo screws (1) from adapter plate.

Tightening torque 51 64 3AZ .

Undo screws (2) from upper rear connection (3).

Tightening torque 51 64 4AZ .

Remove upper rear connection (3) downwards.

Installation note:

Guide lug secures upper rear connection (3) to upper front connection.

Fig 1: Identifying Upper Rear Connection Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Undo screws (2) from radiator air duct.

Tightening torque 51 64 7AZ .

Undo screw (5) from V-strut (4).

Tightening torque 51 64 1AZ .

Remove V-strut (4) downwards.

Undo screws (1) between upper front connection (3) and support for engine compartment lid catch.

Tightening torque 51 64 5AZ .

Remove upper front connection (3) to the left.

Fig 2: Removing V-Strut

Courtesy of BMW OF NORTH AMERICA, INC.