51 32 160 Removing and installing/replacing inner cover on left or right window frame

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Open side window if necessary
Remove FRONT DOOR TRIM PANEL

F30/F31/F35/F80 only:

Remove inner WEATHER STRIP

IMPORTANT: Risk of damage!
Cover (2) must not be kinked.

Lever out cover (2) at clamps (3).

Unclamp cover (2) in direction of arrow and remove.

Installation note:

Fixtures for clamps (3) on cover (2) must not be missing or damaged.

Fig 1: Removing Window Frame Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure cover (1) is correctly seated in joint of rubber window seal (2).

Make sure cover (1) is correctly seated on door seal.

Fig 2: Locating Window Frame Cover

Courtesy of BMW OF NORTH AMERICA, INC.