51 41... Removing and installing/replacing dummy cover or tweeter cover on left or right door trim panel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

64 1 020

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Removal:

Version up to 04/2014:

Lever out dummy cover (1) or tweeter speaker cover at front using special tool 64 1 020 and remove.

Fig 1: Identifying Tweeter Speaker Dummy Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version after 04/2014:

Lever out dummy cover (1) or tweeter speaker cover at front using special tool 64 1 020 .

If necessary, disconnect plug connection and remove cover.

Fig 2: Identifying Tweeter Speaker Dummy Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Version up to 04/2014:

Mount dummy cover (1) or tweeter speaker cover.

Fig 3: Identifying Tweeter Speaker Dummy Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version after 04/2014:

Connect plug connection.

Mount dummy cover (1) or tweeter speaker cover.

Replacement: Remount SWITCH FOR CENTRAL LOCKING SYSTEM .

Fig 4: Identifying Tweeter Speaker Dummy Cover
Courtesy of BMW OF NORTH AMERICA, INC.