51 11... Removing and installing/replacing bracket for fog light on left or right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

REMOVE FRONT BUMPER TRIM

Release retaining clips (1).

Disconnect plug connection (3) at fog light.

Release retaining fixture (2) and remove bracket (4).

Fig 1: Identifying Fog Light Plug Connection And Retaining Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (1) and guides (2) must not be damaged.

Replacement:

Reinstall fog lights . See 63 17 070 REMOVING AND INSTALLING/REPLACING LEFT FOG LIGHT or 63 17 075 REMOVING AND INSTALLING/REPLACING RIGHT FRONT FOG LIGHT .

Fig 2: Identifying Bumper Retaining Clips And Guides

Courtesy of BMW OF NORTH AMERICA, INC.