36 10 713 Checking one road wheel on balancing machine for lateral and radial runout (wheel removed)

Special tools required: 

• 36 1 030
• 36 1 031
• 36 1 032
• 36 1 033
• 36 1 034
• 36 1 035
• 36 1 036

Necessary preliminary tasks: 

• Remove WHEEL 

Mount wheel in balancing machine.

To avoid clamping errors, fit the wheel on the balancing machine in the same way as it is also fitted on the vehicle (valve position facing down).

Fig 1: Fitting Wheel On Balancing Machine

Courtesy of BMW OF NORTH AMERICA, INC.

Use suitable wheel centering element supplied with corresponding balancing machine.

1. Basic flange.
2. Wheel centering element.
3. Type flange.
4. Clamping nut.

Fig 2: Identifying Basic Flange, Wheel Centering Element, Type Flange, Clamping Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 36 1 030 for checking.

Special tool 36 1 030 consists of:

1. Base 36 1 031
2. Post with clamp 36 1 032
3. Holder with clamp 36 1 033
4. Clamp 36 1 034
5. Measuring roll 36 1 035
6. Dial gauge 36 1 036
   Fig 3: Identifying Special Tool 36 1 030 Components

   Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 36 1 030 on tire tread surface.

Turn wheel by hand and measure max. radial tire runout  . See TWO-PART ALLOY WHEELS , WHEELS ONE-PART ALLOY WHEELS or WHEELS STEEL AND ALUMINUM STRIP WHEELS .

Fig 4: Measuring Radial Tire Runout

Courtesy of BMW OF NORTH AMERICA, INC.

Position special tool 36 1 030 on tire sidewall.

Turn wheel by hand and measure max. lateral tire runout  . See WHEELS TWO-PART ALLOY WHEELS , ONE-PART ALLOY WHEELS or STEEL AND ALUMINUM STRIP WHEELS .

Never measure on tire inscription!

If necessary, check DISC WHEEL  (wheel rim) for radial and face runout.

Fig 5: Measuring Lateral Tire Runout

Courtesy of BMW OF NORTH AMERICA, INC.