12 61 280 Removing and installing/replacing oil pressure sensor (N52T)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of burning!
Only perform this repair work on an engine that has cooled down.
Only perform this repair work on an engine that has cooled down.
Necessary preliminary work:
- Remove ACOUSTIC COVER
Installation location:
Oil filter housing, front left.
Engine oil may emerge when oil pressure sensor is replaced; have a cleaning cloth ready.
Release connector (1) and remove.
Release oil pressure sensor (2).
Tightening torque 12 61 2AZ .
Installation note:
Check oil level, top up engine oil if necessary.