64 12... Initializing Telestart hand-held transmitter
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Telestart hand-held transmitter must be initialized when:
- Hand-held transmitter is replaced
- Car Access System control unit is replaced
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 °C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
NOTE:
Initialization can only be carried out with the BMW diagnosis system.
Follow instructions and specifications in procedure.
Service functions:
- Complete vehicle
- Body
- Air conditioning function
- Telestart transmitter
- Initialization