61 31 321 Removing and installing radio and A/C control panel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

IMPORTANT: Risk of damage!

A hard disk is installed in the Car Information Computer (CIC).

Carry out mechanical work on the CIC and adjacent components with care.

Avoid subjecting the CIC to vibration/shocks.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

IMPORTANT: Carry out installation in a dust-free workshop area only.

To avoid damage, do not touch or dirty the display field.

Necessary preliminary work:

Remove DECORATIVE STRIP ON DASHBOARD IN MIDDLE .

Insert special tool 00 9 340 (00 9 341) as illustrated.

Lever trim cover (1) slightly forward and unclip.

Fig 1: Removing Trim Cover

G09948173

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip LED (1).

Remove cover (2).

Installation note:

Retaining lugs and clips must not be damaged.

Fig 2: Locating Cover Retaining Lugs

G09948174

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws.

Remove control panel (1) towards front.

Unlock associated plug connections and disconnect.

Fig 3: Locating Control Panel Screws

G09949914

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .