61 31 118 Replacing front passenger power window switch

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

IMPORTANT: Carry out the following operation carefully so as to avoid damaging the door trim panel and switch.
If necessary, tape off working area.

Lever power window switch (1) with special tool 00 9 317 in direction of arrow out of armrest.

Disconnect associated plug connection and remove power window switch (1).

Fig 1: Removing Power Window Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining hooks (1) of power window switch (2) must not be damaged.

Make sure power window switch (2) is correctly seated in armrest.

Fig 2: Identifying Retaining Hooks Of Power Window Switch

Courtesy of BMW OF NORTH AMERICA, INC.