LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (General Electrical System - Repair) >> Control Units, Modules, Sensors, Aerials >> 61 35 970 Removing and installing/replacing luggage compartment aerial for Comfort Access (left)

61 35 970 Removing and installing/replacing luggage compartment aerial for Comfort Access (left)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work: 

Removal: 

Disconnect the connector (1).

Release screw (2) and remove luggage compartment aerial for Comfort Access (3).

Fig 1: Identifying Luggage Compartment Aerial For Comfort Access With Screw
G09949669Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Tighten luggage compartment aerial for Comfort Access (3) with screw (2).

Connect the connector (1).

Fig 2: Identifying Luggage Compartment Aerial For Comfort Access With Screw
G09949669Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: