61 35 080 Removing and installing/replacing control unit/module for left or right seat adjustment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe NOTES ON PROTECTION FROM ELECTROSTATIC DISCHARGE .

NOTE: To facilitate installation/removal of control unit, move seat upwards and to the rear fully.

Unlock metal tab (1) towards front and remove control unit for seat adjustment (2) towards bottom.

Unlock and disconnect all associated plug connections.

Fig 1: Removing Control Unit For Seat Adjustment Towards Bottom

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure control unit for seat adjustment (1) is correctly seated in bracket (2).

Guides (3) and metal tab (4) must not be damaged.

Fig 2: Identifying Control Unit For Seat Adjustment, Mounting, Guides And Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/ENCODING .