51 47 Floor trim, luggage compartment and engine compartment trim panels
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FLOOR TRIM, LUGGAGE COMPARTMENT AND ENGINE COMPARTMENT TRIM PANELS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Roller cover for luggage compartment frame to body | F07 | M8x22 | 17.5 Nm | |
| 2AZ | Luggage compartment removable panel hinge on rear luggage compartment to body | F07 | 3.3 Nm | ||
| 3AZ | Tail panel cover to transmission cross-member | F07 | 2 Nm | ||
| F15/F85/F86 | 3 Nm | ||||
| 4AZ | Screw connection, lashing eyes | F07/F11 | 6 Nm | ||
| F06/F12/F13 | 20.5 Nm | ||||
| 5AZ | Stud, rail cover | F07 | 6 Nm | ||
| 6AZ | Screw connection, rail support | F07 | Replace screws | 8 Nm | |
| 7AZ | Roller cover for luggage compartment lock to body | F07 | Replace screws | 8 Nm | |
| 8AZ | Screen trim, center | F07 | 1.8 Nm | ||
| 9AZ | Lock/housing to roller cover for luggage compartment (center) | F07 | 2.3 Nm | ||
| 10AZ | Lock to retaining bracket | F07 | 25 Nm | ||
| 11AZ | Locking bracket to roller cover for luggage compartment (center) | F07 | 8 Nm | ||
| 12AZ | Mounting, cargo cover, to frame, cargo cover | F07 | 12 Nm | ||
| 13AZ | Screw connection, underbody protection | F03 | 19 Nm | ||
| 14AZ | Load area net cover mounting | F11 | 2.5 Nm | ||
| 15AZ | Lashing rail to body | F25/F26 | 12 Nm | ||
| F15/F16/F85/F86 | 20 Nm | ||||
| 16AZ | Mounting for roller cover | F25 | 7.6 Nm | ||
| F85/F86 | 8 Nm | ||||
| 17AZ | Battery cover to body | F15/F85/F86 | 3 Nm | ||
| 18AZ | Shoulder to body | F15 | 3 Nm | ||
| F85/F86 | 6 Nm | ||||
| 19AZ | Trim panel, D-pillar bottom to body | F15/F85/F86 | 3 Nm | ||
| 20AZ | Trim panel for luggage compartment floor on body | F15 | Flat-head screw M8x18 | 8.5 Nm | |
| Sheet metal screw ST 4, 8x19 | 3 Nm | ||||