34 51 Slip control system (DSC)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Control unit to hydraulic control unit | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | Initial torque | 2±0.5 Nm | |
| Final torque | 4.3+0.5 Nm | ||||
| 2AZ | ICM control unit to body | F01/F02/F03/F06/F07/F07/F10/F11/F12/F18/F13/F25/F26 | Replace screws. | 8 Nm | |
| 3AZ | Pulse sensor to swivel bearing/wheel carrier | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6x16 | 8 Nm | |
| Pulse sensor to swivel bearing, front, all-wheel drive vehicles | F01, F02, F04, F06, F07, F10, F11, F12 | M6x16 | Hexagon screw AF 10 Replace screw |
12 Nm | |
| 4AZ | Hydraulic control unit to holder | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | 8 Nm | |
| 5AZ | Holder, hydraulic control unit, to body | F01/F02/F03/F04/F06/F07/F10/F12/F13/F11/F18 | 19 Nm | ||
| F25/F26 | M6 | 8 Nm | |||
| 6AZ | Pulse sensor adapter to swivel bearing | F03 | M6 | 8 Nm | |