31 35 005 Removing and installing anti-roll bar link for left or right anti-roll bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Risk of damage!
- Avoid bending the head of the anti-roll bar during assembly!
- An impact screwdriver must not be used!
Detach bracket for brake hose on spring strut.
IMPORTANT:
When releasing push rod screw connections (1) and (3), it is essential to counterhold with a Torx tool.
Slacken nut (1).
Tightening torque 31 35 4AZ
Release nut (3) and remove anti-roll bar link (2).
Tightening torque 31 35 3AZ
Installation note:
Replace self-locking nuts.