51 47 491 Removing and installing/replacing rear underbody protection
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Schematic diagram created using the F25 28iX as an example. There may be differences in detail in the case of other models.
Release screws in area (1) and remove underbody protection (2).
Tightening torque 51 75 1AZ .