31 53 040 Removing and installing/replacing right output shaft bearing block
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove RIGHT OUTPUT SHAFT .
Release screws (1).
Remove bearing block from oil sump.
Installation note:
Replace O-RING .
Tightening torque 31 60 1AZ .