31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F01/F02/F06/F07/F10/F11/F12/F13/F25/F26 | M16 | Observe instructions in Repair Manual See 31 21 180 REPLACING BEARING FOR FRONT WHEEL
or 31 60 000 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT OUTPUT SHAFT
. Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||