31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabiliser to front axle carrier/steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 105 ° | ||||
| F03 | M12 | Replace screw. | |||
| Jointing torque | 100 Nm | ||||
| F03 | M14 | Replace screw. | |||
| Jointing torque | 165 Nm | ||||
| F25/F26 | M10 | 56 Nm | |||
| 2AZ | Stabiliser link to stabiliser/damper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45° | ||||
| 3AZ | Anti-roll bar link to anti-roll bar | F25/F26 | M12 | Replace nut. | 100 Nm |
| 4AZ | Anti-roll bar link to damper | F25/F26 | M12 | Replace nut. | 108 Nm |