13 62 610 Replacing crankshaft pulse generator (N47 D20 O1)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove front UNDERBODY PROTECTION .

Pull connector (1) off pulse generator.

Release screw (2).

Tightening torque: 13 62 10AZ .

Remove pulse generator.

Fig 1: Identifying Connector And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Read out the fault memory of the DDE control unit.

Clear DDE fault memory.