11 23 010 Removing and installing/replacing vibration damper (N52T)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove FAN COWL
- Remove DRIVE BELT
Release screws (1).
Tightening torque: 11 23 1AZ .
Remove vibration damper (2).
Assemble engine.