11 53 082 Removing and installing cooling water feed line (N20, N26)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Remove EXHAUST TURBOCHARGER .

Release screw (1).

Tightening torque: 11 53 3AZ .

Fig 1: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the coolant line (1) in direction of arrow.

Installation note:

Replace O-ring.

Fig 2: Removing Coolant Line

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.