11 44 001 Removing and installing or replacing oil-to-water heat exchanger (N47 D20 O1)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove FULL-FLOW OIL FILTER .
Release screws (1).
Remove plate together with heat exchanger (2).
Tightening torque: 11 42 2AZ .
Assemble engine.