11 00 Mounting the engine on the assembly stand (N20/N26)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 2 300
11 8 541
11 8 542
83 30 0 495 187
83 30 2 212 832

IMPORTANT: Jointing torque and angle of rotation must be observed without fail (risk of damage) .

Necessary preliminary tasks:

Remove engine. See 11 00 050 REMOVING AND INSTALLING ENGINE (N20) .

Attach engine or engine block to the fixture (2) using bolts (1).

Use special tool (2) to attach the engine to special tool 00 2 300 .

Order number, assembly block: 83 30 0 495 187

Order number, fixture: 83 30 2 212 832

Fig 1: Attaching Engine Block To Fixture

Courtesy of BMW OF NORTH AMERICA, INC.