11 00 Mounting engine on assembly stand (N52T)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Aluminum screws/bolts must be replaced each time they are released
.
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage) .
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage) .
NOTE:
Special tools 11 8 542 and 11 8 541 are included in set of special tools 11 8 540
.
Necessary preliminary tasks:
- Remove ENGINE
Use special tool 11 8 541 to attach engine to special tool 00 2 300 .
Use special tool 11 8 542 to attach engine or engine block to 11 8 541.