11 00 Mounting engine on assembly stand (N47 D20 O1)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

IMPORTANT: Pay attention to manufacturer's information

Necessary preliminary work:

Remove engine. See 11 00 050 REMOVE AND INSTALL ENGINE (N47 D20 01 F25) .
Remove engine support arm on left and right. See 22 11 110 REPLACING LEFT ENGINE SUPPORT ARM (N47) and 22 11 100 REPLACING RIGHT ENGINE SUPPORT ARM (N47) .

Prepare special tool 00 2 300 together with the special tool 00 2 320 .

Fig 1: Removing Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Secure special tool 11 8 770 on left to support on engine support arm with screws (1).

Fig 2: Securing Special Tool 11 8 770 On Left To Support On Engine Support Arm With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Secure special tool 11 8 770 on right to support on engine support arm with screws (1).

Fig 3: Securing Special Tool 11 8 770 On Right To Support On Engine Support Arm With Screws

Courtesy of BMW OF NORTH AMERICA, INC.