11 12 040 Removing and installing all ignition coils and injector wells (N55)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove CYLINDER HEAD COVER .
- Remove all INJECTORS .
Release screws (1).
Tightening torque: 11 12 8AZ .
Check fitting bushes (1) for damage.
Installation note:
Replace gasket (2).
Assemble engine.