11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug to oil sump of all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | Oil drain plug to oil sump without all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace plastic screw. | 8 Nm |
| 3AZ | Oil sump (plastic) to crankcase lower section. | N20/N26 | M6 x 25 | 10 Nm | |
| 4AZ | Oil sump (aluminum) to crankcase lower section (all-wheel drive vehicle). | N20/N26 | M6 x 25 M6 x 80 M6 x 120 | 10 Nm | |
| 6AZ | Transmission to oil sump. | N20/N26 | M8 x 50 8.8 | 22 Nm | |
| 7AZ | Oil level sensor to oil sump. | N20/N26 | M6 | 8 Nm | |