11 61 Intake plenum
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - INTAKE PLENUM
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Intake manifold to cylinder head | N47D20 O1 | M6x76 M6x114 |
Observe TIGHTENING SEQUENCE . | |
| 1. Join | 5 Nm | ||||
| 2. Final tightening | 10 Nm | ||||
| 2AZ | Air intake system to exhaust gas recirculation (EGR) cooler | N47D20 O1 | . | ||
| 1. Join | 4 Nm | ||||
| 2. Final tightening | 10 Nm | ||||