11 27 Dual-mass balance
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - DUAL-MASS BALANCE
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
Gearwheel to balancing shaft and crankcase |
N47D20 O1 |
M10x1.5 1. |
Jointing torque |
40 Nm |
| 2. Angle of rotation |
90 ° |
| 2AZ |
Idler gear to crankcase |
N47D20 O1 |
M12x1.5 10.9 |
Replace nut |
70 Nm |