11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screw (central screw) Hub of vibration damper to crankshaft. |
N52T | M16 x 80 | Replace screw. Screw and thread are lightly oiled. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | ||||
| Torque angle | 360 ° | ||||