11 14 Case Covers

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - CASE COVERS

		Type	Thread	Tightening specification	Measure
1AZ	Screw plug to timing case cover	N47D20 O1	M34x1.5	Replace sealing cap	20 Nm
2AZ	End cover to crankcase	N47D20 O1	M6x31	1. Jointing torque	8 Nm
2AZ	End cover to crankcase	N47D20 O1	M6x31	2. Angle of rotation	90 °