11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Sprocket wheel to fitted camshaft | N47D20 O1 | M7x17.3 | 14 Nm | |
| 2AZ | Inlet and exhaust camshafts in camshaft carrier | N47D20 O1 | M6x31 | 10 Nm | |
| 3AZ | Camshaft carrier to cylinder head | N47D20 O1 | M7x35 | Observe tightening sequence . See 11 31 025 REPLACING INTAKE CAMSHAFT (N47 D20 O1) or 11 31 028 REPLACING EXHAUST CAMSHAFT (N47D20 O1) . | 13 Nm |