11 61 Air intake manifold
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - AIR INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screw Air intake manifold to cylinder head. |
N52T | M7 x 50 | 15 Nm | |
| 2AZ | Hexagon nut Air intake manifold to cylinder head. |
N52T | AM7 (to DIN 439) | 15 Nm | |
| 3AZ | Hose clamp Clean-air gaiter to connection, throttle valve assembly. |
N52T | L80-100 | 3 Nm | |
| 4AZ | Ejot screw Fuel line to intake manifold |
N52T | 50 x 20 | 6 Nm | |
| 5AZ | Oval-head screw Holder, engine wiring harness, to intake manifold. |
N52T | M6 x 10 | 8 Nm | |