LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Steering And Wheel Alignment - Repair) >> Pump And Oil Supply >> 32 41... Instructions for removing and installing ear clips

32 41... Instructions for removing and installing ear clips

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: The work steps are show on assorted components.
Ear clip must always be replaced.

To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

Fig 1: Removing Ear Clip
G09849292Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Fig 2: Identifying Ear Clip
G09837951Courtesy of BMW OF NORTH AMERICA, INC.

Attach hook fastener and press ear together with special tool 32 1 260.

Fig 3: Attaching Hook Fastener
G09849257Courtesy of BMW OF NORTH AMERICA, INC.

The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.

Fig 4: Cutting Diagonal Pliers Area
G09837919Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Gap (A) max. 1 mm!
Fig 5: Identifying Ear Clip Gap
G09849296Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals