Storage Location

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

C11

Consisting of:

0490806 Claw

Fig 1: Identifying Puller (0490805)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Remover claw I) With threaded bush - engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
0490807 Claw
NOTE: (Remover claw II) engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
0490808 Spindle
NOTE: (Pressure spindle) Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
0490809 Holding sleeve
NOTE: Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
0490810 Bush
NOTE: (Threaded bush) Engine: except M60, M62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.
0490811 Spindle
NOTE: (Pressure spindle) Engine: M60/B30, M62, S62. Can no longer be ordered separately. Only available as part of set 11 2 010 = 83 30 0 490 805.