LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Flywheel, Engine Vibration Damper, Connecting Rod Bearings -- Repair (G01) >> 11 22 Flywheel >> 11 22 000 Removing and installing/replacing the flywheel (AWD) (X3 xDrive 30i, 2020-2022) >> Notes

11 22 000 Removing and installing/replacing the flywheel (AWD) (X3 xDrive 30i, 2020-2022): Notes

WARNING: Working on 12 V electrical system.
Risk of short circuits! Risk of fire! 
  • Make sure that there is no charger connected to the jump start terminal in the engine compartment.
  • Detach battery ground lead from battery.
  • For auxiliary batteries: Detach battery minus cables from all auxiliary batteries.
CAUTION: Heavy component.
Heavy components can lead to injury or damage. 
  • Remove and install heavy components with the aid of another person/other persons.
NOTE: RISK OF DAMAGE 
Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).
Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.
  • Detach battery terminal from battery pole Do not pry off using a tool.