Mount rear brake guard plate

• Install brake guard plate (2).
• Replace screws (1).

  Parts:  Screws

• Insert screws (1) and tighten.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Brake protection plate on the rear wheel carrier
  M6x12 Replace screw.	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the rear BRAKE DISC .
• Grease brake pads, brake anchor plate and brake caliper with brake PAD PASTE .
• Install rear BRAKE PADS .
• Install the rear brake pad WEAR SENSOR .
• Install the left and right rear WHEEL .
• START-UP OR BED IN (BREAK)-IN of new brake pads and blades (rear brake).